Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Safety instructions 5
IMPORTANT INSTRUCTIONS FOR USE AND CONSERVATION
1. EXPECTED MACHINE USE AND DON’TS. This machine has been made and designed for industrial
washing or cleansing in a water bath of linen and textile materials only. Linen and textile materials must be
free from solvent impregnation or explosives. Any other use will be considered contraindicated without the
written authorization of the manufacturer.
Under-loading as well as overloading is not recommended. Always endeavour to meet the capacity of the
machine.
It is not recommended to wash the linen inside bags. Should it be necessary, load the machine up to its
nominal value.
It is not recommended to spin carpeting, canvas or waterproof fabrics.
2. Machine MATERIALS in contact with wash products are:
Stainless Steel AISI-304 L
Aluminium in models HS-6008 & MS-610 (EH020 & EM025)
EPOXY coating on steel (in some models)
Polypropylene PP
EPDM and NBR
Borosilicate glass
3. The user must inquire the chemical product supplier about the risks of chemicals and its combination. The
user is responsible to assure that products ARE COMPATIBLE and will not produce machine oxidation or
damage either to people or to the washer.
Notice that the hypochlorite (bleach), in certain conditions of use, generates chlorine gas.
The chlorine is a corrosive and oxidizing substance that, in elevated concentrations and temperature,
deteriorates the stainless steel and elastomers.
There are other highly oxidizing agents, such as the ozone, that can cause the same effect.
4. Periodically CLEAN the machine. You will prevent metallic parts corrosion and produce higher output and
have a longer life. To clean the washing machine, use water and detergent, rinse with a damp cloth, and
dry. Cleaning with water jet or pressure steam is forbidden.
5. Once the wash cycle has finished, THE WASHER DOOR SHOULD REMAIN OPEN.
Allows for the ventilation of the washer interior
Avoids the appearance of harmful micro organisms
Extends the lifetime of the door joint
6. NEVER use harsh products to clean the machine and laundry room. There are products on the market,
which are highly corrosive.
7. If machine is left idle for long periods of time, it must be PROTECTED from humidity and temperature
variations.
8. FOLLOW the fabric care instructions supplied by the manufacturer. THE MANUFACTURER REFUSES
ANY RESPONSIBILITY IN CASE OF TEXTILE WEAR AND TEAR.
9. Failure due to improper machine operation may VOID WARRANTY.
10. Replacing any part of the washer can affect the machine’s security.
Examples:
Just a screw or bolt of insufficient strength could cause dangerous damage.
A heater without an internal fuse could provoke a fire.
An inadequate clamp can be the cause of water leaks and short circuits, etc.
The reason for which ONLY ORIGINAL SPARE PARTS MUST BE USED
The incompliance of this precaution may result in a washer breakdown, a serious accident, and loss of the
warranty.
11. When asking for information on your machine, MENTION model and serial number (SERIAL PLATE is
located at the rear side).
12. THE ELECTRICAL DIAGRAM IS LOCATED IN THE UNDERSIDE OF THE WASHER’S TOP COVER.