Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Service removal 63
14.7. GENERAL REVISION
Only by the Authorised Technical Service.
As preventive maintenance action, it is very important to ask the Authorised Technical Service for a
periodic overhaul of the washing machine.
Recommended periodicity: every year or each 2000 washing cycles.
15. SERVICE REMOVAL
Removing the washer from service requires the Authorised Technical Service or a company specialised
in management of waste.
Never release the washer unsecured.
To release the washer and subsequent transportation, refer to the same specifications and
cautions indicated for Installation.
When removing the machine from service:
Disconnect the external switch and lock it mechanically. Remove the power wires.
Close and mechanically interlock the manual water supply valves. Remove water supply hoses.
Assemble the shipping restraints.
Disassemble the door of the washing machine (consult the Authorised Technical Service).
15.1. DISMANTLING
Most of the machine’s components are made with recyclable or recoverable materials.
The injected pieces bear information on the materials that were used to make them.
The main materials are:
Steel plates.
Stainless steel plates.
Aluminium
Borosilicate glass
Polypropylene (PP)
EPDM and NBR elastomers
Electronic components