Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 29
7.3.2. Bath level
This function only appears if the water inlet has been programmed.
Modifying the value of levels is possible in the CONFIGURATION menu.
Possible programming
Level L1
Minimum programmable level
Level L2
Level L3
< < < Option programmed by default
Level L4
Level L5
Level L6
Maximum programmable level
7.3.3. Bath temperature – Heating
Water mixture: in washing machines supplied with hot and cold water, the washer opens the two inlets
alternatively until it reaches the programmed temperature, provided that the hot water temperature enables
it.
When the programmed water temperature is lower than 35ºC / 95F, the two valves open simultaneously.
Programmable range in ºC: 0 – 90
Programmable range in ºF: 32 – 194
Value programmed by default: 0ºC / 32F
Steam or electric heating option
Heating connection: Washing machines with steam or electric heating systems duly activated in the SETUP
menu. The heating will be connected while the bath temperature is below the phase programmed
temperature.
The heating system will not be connected if the bath level inside the washing machine has not reached the
set safety level.