Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
System tools 43
10. SYSTEM TOOLS
The Microprocessor Control offers a group of tools destined to preparing, personalizing, informing and
controlling the global operation of the washing machine.
Within this group of tools, there are two large groups or intervention areas.
CONFIGURING the system
CONSULTING washing machine characteristics, executed programs and operations and alarms
detected by the washing machine control.
TEXT MESSAGES. The user can programme a text message that will appear after a certain operation
time, also programmable.
RECOVERY TANK CLEANER. Optional tool. It can only be seen when the drain option in the SET UP
menu has been configured as VALVE and PUMP double drain. The recovery tank is cleaned by the
sequential filling and emptying of the recovery tank allowing the elimination of residues from the inside of
the tank.
Managing and using these areas appear on the screen in written text.
Accessing the TOOLS mode menus
The system TOOLS mode is accessed from the main menu (chapter 3).
Connect the general switch of the washing machine.
Open the washing machine door.
Activate the ON switch: position I. On the screen, the initialization logo will appear and then, the main menu.
If the washing machine is already operating, the main menu can also be accessed by pressing the ------ key
Select the configuration icon and confirm the selection.
The distinct menus of the TOOLS mode appear.
Multi-function keyboard
Menu selection
SEL
Multi-function keyboard. Access to the selected menu
10.1. CONFIGURATION MENU. PRESENTATION AND ACCESS
This intervention menu offers the possibility to activate or modify a group of parameters and values,
distributed among different submenus, which condition the washing machine’s operation.
The submenus are:
Configuring the parameters for usage and programming (10.2)
Setting the clock
Configuring the card
Managing the security codes
Selecting the options and modifying the values of the distinct parameter are done using the keys on the
washing machine’s control panel.
Multi-function keyboard. Selects the submenus, parameters...
Validates the value of the parameter.
MOD
Multi-function keyboard. Modifies the value of the parameter or the programmable options.
Multi-function keyboard. Accesses the previous menu. Validates the value of the parameter or the
selected o
p
tion.
Numerical keyboard.
Modifies the values of parameters with numerical content.
Its usage is indicated in a specific way.