Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Service removal 61
Disassemble the filter supports.
Remove the filters from their housings and clean the filters with pressurised water. Place them back
into their housings.
Assemble the supports to the electrovalves.
Assemble the hoses in their corresponding inputs. Tighten the fittings.
Connect the external switch, open the manual water input valves and check the water tightness of the
coupling.
14.5. CLEANING THE DISPENSER
Only by qualified personnel
Disconnect and mechanically lock the external switch. Close and mechanically interlock the manual
water supply valves.
Clean the dispenser by using a cloth or sponge dampened with water. Warm water makes cleaning
easier. Never use abrasive products, solvents or tools that could scratch or damage the dispenser.
Once the dispenser cleaning and assembly operations are finished:
Connect the external switch and open the manual water inlet valves.
Start a washing program that uses a bleaching agent and softener and check that both compartments
drain properly.