Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 30
7.3.4. Heating gradient
Optional programming
The increase in bath temperature can be controlled in different gradients defined in degrees/minute.
The type and power of heating, the load in the washing machine and the water temperature can modify the
heating speed, mainly in the fastest gradients.
Requirements that allow the programming of this function:
Machine with heating system installed and duly activated in the SETUP menu.
Programming option activated in the corresponding stage of the CONFIGURATION menu.
Temperature programmed in that phase.
Heating gradients
Value in Centigrade degrees: 1º / minute
Value in Fahrenheit degrees: 2.0º / minute
Value in Centigrade degrees: 2º / minute
Value in Fahrenheit degrees: 3.5º / minute
Value in Centigrade degrees: 3º / minute
Value in Fahrenheit degrees: 5.5º / minute
Gradient reachable only with steam heating
Constant heating connection
< < < Option programmed by default
7.3.5. Product dosing
Programming the dosing of two products simultaneously at each phase is possible.
Programming the second product will only be possible if the first dosing has been programmed.
Dosing icon of the first product
Dosing icon of the second product
Dosing of products by means of the washing machine dispenser. (Internal dosing)
Dosing icons identify the dispenser compartment
No dosing in the phase
< < < Option programmed by default
Dosing in powder product compartment (dosage 1)
Dosing in powder product compartment (dosage 2)
Dosing in liquid product compartment (dosage 3)
Dosing in liquid product compartment (dosage 4)