Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 32
7.3.8.
Rotation speed. Optional programming
Programming this function is only possible if the parameter has been activated in CONFIGURATION and a
rotation value has been programmed.
Allows selecting a rotation speed in the wash cycle, among four pre-programmed speeds. These speeds are
modifiable in the CONFIGURATION menu.
Depending on the load, the drum rotation speed can vary +/- 5 rpm regarding the programmed speed.
Possible programming
Rotation
speeds in rpm
Speed 1 WS1 17
Speed 2 WS2 22
Speed 3 WS3 27
Speed 4
< < < Option programmed by default
WS4 32
7.3.9. Rotation time
The rotation time starts when the programmed values for level, dosing and temperature have been reached.
Programmable time range: 0 – 99 minutes
Value programmed by default: 1min
7.3.10. Gradual cooling
Function that allows gradually reducing the bath temperature by admitting cold water up to 45ºC / 113ºF.
The cooling is executed once the rotation time ends and before the bath is drained.
This function is only programmable if the temperature programmed in the phase is greater than 50ºC /
122ºF.
Possible programming:
No gradual cooling
< < < Option programmed by default
Yes, gradual cooling