A SERVICE OF

logo

Rockwell Automation Publication 2097-UM002C-EN-P - December 2013 85
Configure and Start Up the Kinetix 350 Drive System Chapter 5
The New Controller dialog box appears.
4. Configure the new controller.
a. From the Type pull-down menu, choose the controller type.
b. From the Revision pull-down menu, choose the revision.
c. Enter the file Name.
5. Click OK.
6. From the Edit menu, choose Controller Properties.
The Controller Properties dialog box appears.
7. Click the Date/Time tab.
8. Check Enable Time Synchronization.
This permits the controller to participate in the ControlLogix Time
Synchronization or CIP Sync. The controller also participates in an
election in the Logix5000 system for the best GrandMaster clock.
9. Click OK.