Filter
Top Products
3-6
CYCLES
Turn the knob to choose the right wash cycle
for the type of fabrics you are washing. When
the knob points to a cycle, the indicator light
for the cycle will glow. If the default settings
for the Modifiers and Options are suitable for
your wash load, you may press Start to begin
the wash cycle.
PRESET CYCLE SETTINGS
For ease of use, preset cycle settings provide
the recommended fabric care settings for each
cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the
knob. The preset cycle settings will be
displayed (see the following chart).
NOTE: The preset cycle times may vary
slightly depending on your model.
3. Press START. The wash cycle will begin.
PRESET CYCLE SETTINGS
Cycle Preset
Minute
s
Soil
Level
*
Wash/Rinse
Temp
Wh
ites 73 Heavy Hot/Cold
Super Wash
68 Heavy Hot/Cold
Normal
46 Normal Warm/Cold
Wrinkle Control
46 Medium Warm/Cold
Colors/Jean
s 45 Normal Cold/Cold
Delicate 35 Medium Warm/Cold
Handwash
36 Light Cold/Cold
Rinse & Spin
33 Not
applicable
Not
applicable
Spin Only
16 Not
applicable
Not
applicable
* Cycle time in minutes will appear in the display while
you are making selections. The total cycle time will
appear, including an estimated time for drain and fill
times, once Start is pressed.
NOTE: Load only to the top of the basket.
Overloading can cause poor cleaning. See
“Starting The Washer,” page 3-3.
WHITES
This cycle introduces liquid chlorine bleach
to the load at the proper time for improved
whitening of your heavily soiled white fabrics.
Cycle combines high-speed wash action and
high-speed spin. The default option setting for
this cycle is Extra Rinse to thoroughly remove
detergent and bleach. For maximum soil and
stain removal, liquid chlorine bleach should
be used.