Filter
Top Products
19
D. EXTERNAL SUPPLY CONNECTIONS
1. Optional Sprinkler Water Supply
A 40 PSI (276 kPa) supply of water must be connected into the 1” (2.54 cm) N.P.T. sprinkler connection
located on the left side of the tumbler (basket) base on dryer models with a sprinkler system.
2. Compressed Air Supply
A minimum of 20 cubic feet per hour (cfh) .566 cm/hr at 80 PSI (551.6 kPa) of dry, clean and regulated
compressed air must be supplied to the dryer.
The compressed air supply must be connected into the 3/8” F.P.T. fitting which is located in the rear corner
of the lower heat console section.