EQQE026I EQQE036I
EQQE026I APPLICATION
APPL
ENDED IN ERROR
EC
. OPER =
OPERNUM
, PRTY =
PRI
, IA =
IA
Explanation: This message is issued when an operation on a general type work station has ended in error and the
ALERTS initialization statement specifies TYPE(ERROROPER).
System action: Normal TME 10 OPC processing continues.
User response: Perform error recovery actions for the operation specified.
EQQE027I OPERATION
OPERNUM
, IN APPLICATION
APPL
, IA =
ARRTIME
IS LATE
Explanation: This message is issued when a ready operation on a general type workstation has reached its latest
start time but has not yet started.
System action: Normal TME 10 OPC processing continues.
User response: Investigate what is keeping the operation from starting and take appropriate actions to enable it to
start.
EQQE028I LONG DURATION FOR OPERATION
OPERNUM
, IN APPLICATION
APPL
, IA =
ARRTIME
Explanation: This message is issued when a started operation on a general type workstation has been active longer
than its estimated duration multiplied by the feedback limit, divided by 100. For example, if the feedback limit is 200
and the estimated duration is ten minutes, then the message will be issued if the operation has been active longer
than twenty minutes.
System action: Normal TME 10 OPC processing continues.
User response: Investigate why the operation has been active so long. If possible, take corrective action to speed
up operation processing.
EQQE029E TRACK (OPCASUB/JOBOPT) IS SPECIFIED, AND AS USER SUBMITTED
JOBNAME
(
JOBNUM
)
OUTSIDE OPC/ESA, IT WILL NOT BE TRACKED
Explanation: The job is not one that TME 10 OPC has submitted although it is known to TME 10 OPC as one that
should be tracked. However, because someone submitted the job outside of TME 10 OPC’s control, the job will not
be tracked.
System action: None.
User response: None.
EQQE030I USER
USER
CAUSED A NEW SPECIAL RESOURCE TO BE DEFINED. NAME OF NEW RESOURCE
IS:
RESOURCE
Explanation: The request to create the new resource came from; an SRSTAT command, EQQEVPGM using
SRSTAT as input, the EQQUSINS subroutine, the EQQUSIN subroutine, or from the dataset triggering function.
System action: Processing continues.
User response: None.
EQQE036I JOB
JOBNAME
(
JNUM
) ENDED IN ERROR
EC
. PRTY=
PRI
, APPL =
APPL
, WORK STATION =
WSID
, IA
=
IA
Explanation: This message is issued when an operation on a computer or printer workstation has ended in error and
the ALERTS initialization statement specifies TYPE(ERROROPER).
System action: Normal TME 10 OPC processing continues.
User response: Perform error recovery actions for current job.
Chapter 8. EQQEnnn Messages 87
