EQQE008I EQQE008I
| EQQE008I READY OPERATIONS QUEUE LENGTH STATISTICS FOLLOW:
|
Q10
Q100
Q1000
Q5000
Q10000
>10000
|
R1
R2
R3
R4
R5
R6
| OPERATIONS READY AND FOUND WAITING FOR SPECIAL RESOURCES:
|
Q10
Q100
Q1000
Q5000
Q10000
>10000
|
S1
S2
S3
S4
S5
S6
| OPERATIONS READY TO SELECT A WINNER:
|
Q10
Q100
Q1000
Q5000
Q10000
>10000
|
Q1
Q2
Q3
Q4
Q5
Q6
| Explanation: This message is issued if the WSA statistics are active. This can be done either by specifying the
| STATMSG(WSATASK) keyword in the JTOPTS initialization statement, or by using the modify command, /F
| subsys,WSASTA=ON.
| Once activated, this messages is regularly issued by the event manager subtask, until it is deactivated. The interval
| between two messages is calculated as follows:
| If STATIM is nonzero (in the initial parm or by modify command) the message is issued approximately every
n
| minutes (where
n
is the STATIM value), if any events have been processed.
| Otherwise, if EVELIM is nonzero (in the initial parm or by modify command) then the message is issued
| approximately every
n
events (where
n
is the EVELIM value).
| Otherwise, the message is issued approximately every
n
events, where
n
is half the JTOPTS BACKUP keyword
| value (default BACKUP is 400).
| This message shows some statistic information about the operations ready queue list and its handling by the WSA
| task since it was last issued, or, if it is the first time it is isuued, since the last time the event manager processed the
| events queue.
| The first set of variables (R1-R6) gives the number of times that the ready list was found to be within a specific range,
| each time the WSA task processed it to select a “winner” operation (one to be submitted). For example, R1=10
| means that the ready queue list was found 10 times to contain
n
operations, where
n
< 10.
| The second set of variables (S1-S6) gives the number of times that the number of operations, read from the ready list
| and found waiting for special resources, was found to be within a specific range. For example, S2=10 means that the
| number of opertaions read and found waiting for special resources was >= 10 and < 100.
| The third set of variables (Q1-Q6) gives the number of times that the number of operations, read from the ready list
| before finding a “winner,” was found to be within a specific range. For example, Q3=5 means that three times the
| WSA task needed to read
n
operations (where
n
sources was >= 100 and < 1000, before finding a “winner.”
| System action: Normal TME 10 OPC processing continues.
| User response: None.
Chapter 8. EQQEnnn Messages 83
