Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
510975
42
Step 5: Set Fabric Selector
Select NORMAL for cottons, PERM PRESS for
permanent press, DELICATE for sensitive items or
FLUFF (NO HEAT) for items that require no heat.
NOTE: Always follow manufacturer’s care label
instructions.
Figure 33
Step 6: Start Dryer
Metered Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
Figure 34
Nonmetered Models
Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button. IN
USE light will come on (indicating start of cycle).
Figure 35
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to page 40.
D342I
D363I
PERM
PRESS
FLUFF
(NO HEAT)
FABRIC SELECTOR
NORMAL
DELICATE
METERED MODELS
D773I
D773I
NONMETERED MODELS