Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
510975
18
Step 5: Wipe Out Inside of Each Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Figure 10
Step 6: Plug In the Dryer Unit
Refer to section on Electrical Requirements, and
connect the dryer to an electrical power source.
Figure 11
Step 7: Check Installation
Refer to Installer Checklist on the back cover and
make sure that dryer is installed correctly.
D604I
D604I
D254I
D254I
ELECTRIC
GAS
Connect each unit to 30 Amp circuit.
Plug each cord into separately
fused 15 Amp circuit.