Page 494 of 906 NT7D16 Data Access card
553-3001-211 Standard 3.00 August 2005
V 1 Result codes sent in Verbose format
X 1 Features selection 0 - 8, 10 - 13
P — Dial method (pulse)
S0 0 *?1 Manual Answer (if 0)?Auto answer on 1 ring
S1 0 Ring count 0
S2 43 Escape sequence character Plus sign (+)
S3 13 Terminator character Carriage Return (<CR>)
S4 10 New line character Line Feed (<LF>)
S5 8 Back space character BS (<BS>)
S6 2 Blind dial delay 2 seconds
S7 30 Timeout for outbound call answer 30 seconds
S8 2 Dial pause delay 2 seconds
S9 6 Carrier detect response time 0.6 seconds
S10 14 Call disconnect timer for carrier loss 1.4 seconds
S11 95 Touchtone space 95 milliseconds
S12 50 Escape sequence guard timer 1.00 seconds
Table 162
Hayes parameters and S register reset values (Part 2 of 2)
Parameter Value Description
* Parameters that are reset to the downloaded operating parameters when 1 is
entered at the reset command.
