82 Start Menu Program Options
MX7 Reference Guide E-EQ-MX7RG-B
Odyssey Client
Access: | Programs | Odyssey Client
Odyssey automatically installs and runs after every cold and warm boot.
Disable Odyssey
Start | Programs | Odyssey Client | Settings | Disable Odyssey
When Odyssey is disabled, the Wireless Zero Config screen is displayed. When Odyssey is
disabled before Suspend mode, it is not re-enabled upon a return from suspend.
Enable Odyssey
Start | Programs | Odyssey Client | Settings | Enable Odyssey
When Odyssey is disabled, selecting Enable Odyssey from the Settings menu may not re-enable
Odyssey. Odyssey is enabled by default after every cold and warm reset.
See Chapter 5 “Wireless Network Configuration” for Odyssey client setup information and
instruction.
Radio Config Utility
Access: | Programs | Radio Config Utility
Figure 3-2 Radio Config Utility Main Menu
WiFi icon in Toolbar. Tapping the WiFi icon in the toolbar presents the Radio Config
Utility Main Menu to the user. See Chapter 5 “Wireless Network Configuration”,
section titled “IEEE 802.11g Wireless LAN Configuration Utility” for WiFi
information and instruction.
Wireless Zero Config Utility and the Odyssey
Client
This utility has an icon in the toolbar that looks like networked computers with a red X through
them, indicating the application is inactive at this time.
Note: LXE recommends using the Funk Odyssey client to configure the Odyssey Client.
Wireless Zero Config is not recommended for configuring the radio.
