32-Key Numeric-Alpha Keypad 249
E-EQ-MX7RG-B MX7 Reference Guide
32-Key Numeric-Alpha Keypad
When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key or the
Caps key sequence (Blue+Tab) for upper case alphabetic characters.
Pressing the Alph key forces “Alpha” mode for the 2,3,4,5,6,7,8, and 9 keys. The 1 and 0 keys continue to place a
1 and 0 into the text field.
To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle
between Alpha and Numeric mode.
When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key
first then the rest of the key sequence.
Press These Keys and Then …
To Get This MX7 Key /
Function
Blue Orange Ctl Alt Shft Alpha
Press This Key
Power / Suspend Power
7
Field Exit (default
VK_PAUSE)
MAP MAP
Diamond#1
MAP=Mappable
=
or
(
x
x
MAP
Diamond#2
Default is MAP
MAP=Mappable
!
or
)
x
x
MAP
Diamond#3
Default is MAP
MAP=Mappable
Volume Adjust Mode x Scan Key
8
Display Backlight
Brightness Adjust Mode
x Scan Key
9
Toggle Blue Mode Blue
Toggle Orange Mode Orange
Toggle Shift Mode Shft
Toggle Alpha Mode
Alph
Alt Mode Alt
Control Mode Ctrl
Scan Mode Scan Key
Esc x Alt
Space Spc
Enter Enter
CapsLock (Toggle) x Tab
Back Space x Spc
Tab Tab
7
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off)
or places it in Suspend (when active).
8
Orange+Scan enters Volume Adjust Mode. Use Up Arrow and Down Arrow to adjust volume. Press any other
key but Up Arrow or Down Arrow to exit Adjust Mode.
9
Blue+Scan enters Backlight Brightness Adjust Mode. Use the Up Arrow and Down Arrow to adjust brightness.
Press any other key but Up Arrow or Down Arrow to exit Adjust Mode.
