180 Summit Client Configuration
MX7 Reference Guide E-EQ-MX7RG-B
Parameter Default Explanation
Radio Mode B+G rates Specify 802.11g and/or 802.11b when communicating with the
Access Point.
Options are: B rates only or B+G rates.
Auth Type Open 802.11 authentication type used when associating with the
Access Point.
Options are: Open, LEAP, or Shared key.
EAP Type None Extensible Authentication Protocol (EAP) type used for 802.1x
authentication to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP,
PEAP-GTC, or EAP-TLS.
Encryption None Type of encryption to be used to protect transmitted data.
Options are: None, Manual WEP, Auto WEP, WPA PSK,
WPA TKIP, WPA2 PSK, WPA2 TKIP, WPA2 AES, CCKM
TKIP, or CCKM AES.
Status
This screen displays information on the current profile and radio connection. Information cannot
be edited or changed on the Status panel.
The panel displays:
• Config profile being used.
• The client name, IP address and MAC address.
• The status of the radio (down, associated,
authenticated, etc.).
• The name, IP address and MAC address of the
Access Point maintaining the connection to the
network.
• Signal strength (changes with network activity)
• Channel currently being used for wireless
traffic.
• Current transmit power in mW.
• Bit rate in mBit.
Figure 5-4 Summit Client Utility – Status tab
