134 ActiveSync / Get Connected Process
MX7 Reference Guide E-EQ-MX7RG-B
ActiveSync indicator on the host remains gray
The host doesn't know you are trying to connect. May mean a bad cable, with no control lines
connected, or an incompatible baud rate. Try the connection again, with a known-good cable.
Testing connection with a terminal emulator program, or a serial port monitor
You can use HyperTerminal or some other terminal emulator program to do a rough test of
ActiveSync. Set the terminal emulator to 8 bits, no parity, 1 stop bits, and the same baud rate as
the connection on the CE device. After selecting Start | Programs | Communication | Connect on
the CE device, the word "CLIENT" appears on the CE display in ASCII format. When using a
serial port monitor, you see the host echo "CLIENT", followed by "SERVER". After this point,
the data stream becomes straight (binary) PPP.
Drop down list is blank in the ActiveSync dialog box
The radio link is broken. Make sure that the radio has a valid IP address.
