Revision Notice
Notices Added WEEE statement. Added trademarked statement for Summit Data
Communications and Odyssey Client.
Entire Manual Noted the replacement of SE824 scanner with SE955 scanner where
applicable. Removed references to Bluetooth except to state that it is not
supported.
Chapter 1 – Introduction Added section titled “Features”.
Added Multi AppLock activation key instruction.
Added Summit Client Desktop panel to section titled “Quick Start”.
“Installing Trigger Handle”: Added: “Equipment Needed: Torque wrench
capable of torquing to 3±1 in/lb (.34± .11 N/m)”. Removed “and washers”
from step 5 and included torque instruction in step 6.
Expanded end-user instruction for voice data entry using audio cable and
headsets.
Accessories: Updated to reflect ROHS compliance. Added voice accessories.
Removed MX7A309PSACWW. Added 9000A302PSACWW - AC/DC
power supply, int’l, no power cord.
Added SE955 scanner. Noted the replacement of SE824 scanner with SE955
scanner where applicable.
Chapter 2 – Physical
Description and Layout
Removed statement referring to low battery warning dialog box and edited
“Power Supply” section for clarification.
Chapter 3 – System
Configuration
Added user information for JAVA option.
Updated battery charge panels – Battery Panel and Power Panel.
Updated scanner panels with barcode wedge enhancement.
Moved Odyssey Client menu information and Summit Client menu
information from “Start | Control Panel” section to Chapter 5 “Wireless
Network Configuration”.
Corrected Order statement for Utilities | LXE Login Install and LXE Login.
Updated “LAUNCH.EXE” persist settings.
Added new sections to Utilities: “Enabling GrabTime”, “Configuring
CapsLock Behavior”, “Launch App / Launch Command” and “Configuring
IPv6”.
Added Summit Client panel to section titled “Network and Dial-Up
Connections”.
Chapter 4 – AppLock Added Multi AppLock instruction.
Chapter 5 – Wireless
Network Configuration
Added instruction for Summit Client Utility software.
Odyssey Client: Added instructions for setting No Security and WEP-LEAP.
Instructions for LEAP with WPA are included in section for EAP-LEAP.
Appendix A – Keymaps Added section titled “Creating Custom Keymaps”.
Appendix B – Technical
Specifications
Added technical specifications for the LXE CF Radio in PCMCIA Adapter
card. Added note about SE955 scanner replacing SE824 scanner where
applicable.
