A SERVICE OF

logo

Funk Odyssey Client Configuration 211
E-EQ-MX7RG-B MX7 Reference Guide
Server Authentication
To validate the server certificate the root CA certificate must be installed. For instructions for
installing see section titled “Root Certificates”.
The RADIUS server certificate is not required, only the root CA which issued the server
certificate.
Next configure the Root CA Certificate as a Trusted Root CA as described in the section titled
“Trusted Server Configuration”.
Navigate back to the authentication type screen and check the “Validate server certificate”
checkbox.
Tap Next to the end then Finish buttons. Tap OK to end the configuration process.
Figure 5-49 Validate Server Certificate for PEAP/GTC
Navigate back to the authentication type screen and enable the Validate server certificate
checkbox.
Tap Next to the end then the Finish buttons.
Tap OK to end configuration.