ActiveSync / Get Connected Process 129
E-EQ-MX7RG-B MX7 Reference Guide
Connect -- Initial Install Process
Connect the correct** cable to the PC (the host) and the MX7 (the client). Tap the | Programs
| Communication | Connect icon on the MX7.
The MX7 connection is made using
| Programs | Communication | ActiveSync.
** Cables for initial ActiveSync Configuration:
USB Client to PC/Laptop MX7A052MULTICBLUSB
Serial Client to PC/Laptop MX7A055MULTICBLDA9F
When the desktop/laptop computer and the MX7 successfully connect, the initial ActiveSync
process is complete.
Change Connection Parameters
Tap the | Settings | Control Panel | PC Connection. Tap the Change Connection button.
From the popup list, choose
Option Description
USB (Default) This will set up the MX7 to use the USB port direct.
COM1 @ 57600 This will set up the MX7 to use COM 1 direct at 57600 baud
• Tap OK and ensure the check box for “Enable direct connections to the desktop computer”
is checked.
• Tap OK to return to Settings.
• Select Scanner and ensure the integrated scanner is set to a port that is different than the
“Connect” port (COM 1).
