Start Menu Program Options 79
E-EQ-MX7RG-B MX7 Reference Guide
Communication
Access: | Programs | Communication
Note: Some communication menu options require an external modem connection to the MX7.
Modems are not available from LXE nor supported by LXE.
ActiveSync
After a relationship (partnership) has been established with the MX7 and a desktop computer,
ActiveSync can synchronize using the radio link, serial port, or USB port on the MX7.
Refer to “ActiveSync / Get Connected Process” later in this chapter for more information and
instruction.
To initiate synchronization (or radio link) from the mobile device that already has a relationship
with the desktop computer, tap
| Programs | Communication | ActiveSync to begin the
process.
For more information about using ActiveSync on your desktop computer, open ActiveSync, then
open ActiveSync Help.
Connect
Connect is used to initiate a hardwired connection to a host and to create the initial partnership for
synchronizing over the radio.
The default connect setup is USB direct connect.
After a Connect setup is selected,
| Programs | Communication | Connect will start to
connect to a host.
See Also: “Cold Boot and Loss of Host Re-connection”
