A SERVICE OF

logo

ELECTRICAL SYSTEM 16-63
Radiator Fan System
Fan System Circuit Inspection
Disconnect the lead connector [A] from the radiator fan
switch.
Using an auxiliary wire [A], connect the radiator fan switch
leads.
If the fan rotates, inspect the fan switch.
If the fan does not rotate, inspect the following.
Leads and Connectors
Main Fuse and Fan Fuse
Fan Motor
Fan Motor Inspection
Remove the fuel tank (see Fuel System (DFI) chapter).
Disconnect the 2–pin connector [A] in the fan motor leads.
Pull the lead until come out the connector.
Using two auxiliary wires [A], supply battery [B] power to
the fan motor.
If the fan does not rotate, t he fan motor is defective and
must be replaced.