A SERVICE OF

logo

ENGINE TOP END 5-33
Throttle Body Holder
Throttle Body Holder Installation
Be sure to install the O-rings [A].
Install the clamps [B] as shown and so that its hole fit on
the projection [C] of the holder.
Tighten:
Torqu
e-
Throt
tle Body Holde r Bolts [D]: 12 N·m (1.2 kgf·m,
104 in·lb)
Throttle Body Holder Cl amp Screws [E]: 2.0 N·m
(0.2 k
gf·m, 17 in·lb)