A SERVICE OF

logo

8-8 ENGINE REMO VAL /INSTALLATION
Engine Removal/Installation
Support the engine with a suitable stand [A].
Put a plank [B] onto the suitable stand for engine balance.
Remove:
Right and Left Engine Upper Mounting Bolts [A]
Front Engine Bracket Bolts [B]
Front Engine Bracket [C]
Remove the middle and lower engine mounting nuts [A]
and bolts.
Remove:
Rear Engine Bracket Bolts [B]
Rear Engine Bracket [C]
Using the nut wrench [A], loosen the locknut [B].
Special Tool - Engine Mount Nut Wrench: 57001–1450