A SERVICE OF

logo

7-16 ENGINE LUBRICATION SYSTEM
Oil Pressure Switch
Oil Pressure Switch Removal
Remove:
Engine
Oil (drain, see Periodic Maintenance chapter)
Switch Cover [A]
Switch Terminal [B]
Oil Pre
ssure Switch [C]
Oil Pressure Switch Installation
Apply silicone sealant to the threads of the oil pressure
switch and tighten it.
Sealant - Kawasaki Bond (Silicone Sealant): 56019–120
To
rque -
Oi
l Pressure Switch: 15 N·m (1.5 k gf·m, 11 ft·lb)
Install the switch lead direction upward.
Tighten the terminal bolt.
Torque - Oil Pressure Switch Terminal Bolt: 1.5 N·m (0.15
kgf·m, 13 in·lb)
Apply grease to the terminal.