A SERVICE OF

logo

9-22 CRANKSHAFT/T RANSMISSION
Transmission
Shift Pedal Removal
Mark [A] the position of the shift lever [B] on the shift shaft
so that
it can be installed later in the same position.
Remove:
Shift Lever Bolt [C]
Shift L
ever
Remove:
Footpeg Bracket Bolts [A]
Muffler Mounting Bolt [B]
Footpeg Bracket [C]
Remove the bolt [A], footpeg [B], and shift pedal [C].
Shift Pedal Installation
Apply grease to the oil seal lip.
Press the oil seals [A] in the shift pedal housing [B] so that
the oil seal surfaces are flush with the housing end [C] as
shown.
Apply grease to the sliding surfaces [A] on the footpeg
holder [B].
Apply a non-permanent locking agent to the shift pedal
mounting bolt [C].
Tighten:
Torque - Shift Pedal Mounting Bolt: 34 N·m (3.5 kgf·m, 25
ft·lb)
[D] Footpeg Bracket
[E] S hift Pedal
[F] Oil Seals