A SERVICE OF

logo

BRAKES 12-15
Brake Pads
Front Brake Pad Removal
Remove:
Mounting Bolts [A]
Remove:
Pad Pin Bolt [A]
PadSpring[B]
Brake Pads [C]
Front Brake Pad Installation
Push the caliper pistons in by hand as far as they will go.
Apply silicone grease to the stopper ring [A].
Install:
Brake Pads
Pad Spring
Pad Pin Bolts
Torque - Front Brake Pad Pin Bolts: 17 N·m ( 1.7 kgf·m, 12
ft·lb)
WARNING
Do not attempt to drive the motorcycle until a full
brake lever is obtained by pumping the brake lever
until the pads are against the disc. The brake will
not function on the first application of the lever if
this is not done.
Rear Brake Pad Removal
Remove the caliper with the hose installed.
Remove:
Clip [A]
Pad Pi n [B]
Brake Pads [C]