■ vlan VLAN-ID ip ospf IP-ADDR md5-auth-key-chain CHAIN-NAME
Specify key chain to use for MD5 authentication.
■ vlan VLAN-ID ip ospf all md5-auth-key-chain CHAIN-NAME
Specify key chain to use for MD5 authentication.
connection-rate-filter
■ vlan VLAN-ID connection-rate-filter
Usage: connection-rate-lter unblock < host SRC-IP-ADDR | SRC-IP-ADDRESS/mask
>
[no] connection-rate-lter sensitivity <low|medium|high|aggressive>
Description: Re-enables access to a host or set of hosts that has been previously
blocked by the connection rate lter. Disabling or setting sensitivity
may have improved performance after rebooting the switch
Next Available Option:
■ unblock -- Resets a host previously blocked by the connection rate filter (p. 749)
cost
■ vlan VLAN-ID ip ospf cost < 1 to 65535 >
Set metric of this interface.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf IP-ADDR cost < 1 to 65535 >
Set metric of this interface.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf all cost < 1 to 65535 >
Set metric of this interface.
Range: < 1 to 65535 >
dead-interval
■ vlan VLAN-ID ip ospf dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf IP-ADDR dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
■ vlan VLAN-ID ip ospf all dead-interval < 1 to 65535 >
Set dead interval in seconds; the default is 40.
Range: < 1 to 65535 >
721© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
