of MAC Authentication is shown.
If 'auth-server' keyword has been specied then the
authentication server-related conguration items are shown.
If PORT-LIST and 'detail' keyword has been specied then the
detailed conguration of MAC Authentication for the specied
ports is shown.
If 'clients' keyword has been specied then the connected MAC
address information is shown.
Next Available Options:
■ config -- Show the current configuration of MAC Authentication.(p. 540)
■ clients -- Show the connected MAC address information.(p. 538)
management
■ show management
Usage: show management
Description: Show the switch's addresses available for management
and the time server if the switch uses one.
mcast
■ show rate-limit mcast
Show limits for ingress multicast trafc.
Next Available Options:
■ port-list -- Specify ports for which information will be shown. ([ethernet] PORT-LIST) (p. 578)
■ detailed -- Show Inbound Radius Override details.(p. 546)
mesh
■ show mesh
Usage: show mesh
Description: Show the switch mesh information such as mesh
ports, adjacent switches and their peer ports.
■ show tech mesh
Usage: show tech [all|custom|buffers|instrumentation|mesh|route|statistics
|transceivers|vrrp]
Description: Display output of a predened command sequence used by
technical support.
mirror_session_id
■ show monitor < 1 to 4 >
Mirror destination number.
Range: < 1 to 4 >
569© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
