■ max-msg-size < 484 to 65535 > -- Set maximum message size value; default is 1472. (p. 628)
■ port-mask -- Set range of udp ports with this mask. (TCP/UDP-PORT) (p. 629)
■ retries < 0 to 255 > -- Set retries value; default is 3. (p. 630)
■ timeout < 0 to 2147483647 > -- Set time-out value; default is 1500. (p. 632)
■ taglist -- Set list of values used to select this entry from snmpNotifyTable. (ASCII-STR) (p. 631)
■ udp-port -- Set UDP port number to which the messages are sent; default is 162.
(TCP/UDP-PORT) (p. 632)
max-msg-size
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IP-ADDR max-msg-size < 484 to 65535
>
Set maximum message size value; default is 1472.
Range: < 484 to 65535 >
■ snmpv3 targetaddress TARGETADDRESS params PARAMS IPV6-ADDR max-msg-size < 484 to
65535 >
Set maximum message size value; default is 1472.
Range: < 484 to 65535 >
message-processing
■ snmpv3 params PARAMS user USER sec-model < ver1 | ver2c > message-processing < ver1 |
ver2c | ver3 >
Set message processing model value.
Supported Values:
■ ver1 -- SNMP version 1 message processing model.
■ ver2c -- SNMP version 2c message processing model.
■ ver3 -- SNMP version 3 message processing model.
■ snmpv3 params PARAMS user USER sec-model ver3 message-processing
Set message processing model value.
Next Available Option:
■ ver3 < noauth | auth | priv > -- Set security level. (p. 633)
name
■ snmpv3 community index INDEX name NAME
Set community name.
Next Available Option:
■ sec-name -- Set security name. (ASCII-STR) (p. 631)
notify
■ [no] snmpv3 notify NOTIFY
Congure SNMPv3 Notication entry.
628© 2009 Hewlett-Packard Development Company, L.P.
snmpv3Command Line Interface Reference Guide
