peer-ip
■ show ip rip peer IP-ADDR
Specify IP address of the RIP peer to show.
pending
■ show ip pim pending
Show (*,G) and (S,G) Join Pending Information.
■ show spanning-tree pending
Usage: show spanning-tree pending ...
Description: Show spanning tree pending conguration.
Use 'show spanning-tree pending ?' to see a list of all
available options.
Next Available Options:
■ mst-config -- Show multiple spanning tree pending region configuration.(p. 571)
■ instance -- Show multiple spanning tree instance pending configuration information.(p. 557)
pim
■ show ip pim
Usage: show ip pim [command]
Description: Show PIM protocol operational and conguration information.
The 'command' can be used to obtain more detailed information
of the protocol functionality. Use 'show ip pim ?' to get a
list of all possible commands.
Next Available Options:
■ mroute -- Show PIM-specific information from the IP multicast routing table(p. 571)
■ interface -- Show PIM interface information(p. 559)
■ neighbor -- Show PIM neighbor information(p. 573)
■ bsr -- Show Bootstrap Router information(p. 535)
■ rp-candidate -- Show Candidate-RP operational and configuration information(p. 588)
■ rp-set -- Show RP-Set information available on the router(p. 588)
■ rp-pending -- Show (*,*,RP) Join Pending Information. (p. 588)
■ pending -- Show (*,G) and (S,G) Join Pending Information. (p. 576)
policy
■ show policy
Show policy cong.
Next Available Options:
■ name -- Enter policy name. (ASCII-STR) (p. 572)
■ resources -- Show the policy resources(p. 585)
576© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
