Filter
Top Products
35
5. Loosen the tension on the blower motor v-belts by loosening the jam nuts and then the adjustment bolt.
6. Remove the bolts securing the motor mount assembly to the dryer cabinet and remove the motor mount
assembly from the dryer.
NOTE: The motor mount assembly will not be able to be removed to far due the wiring harness
still connected.
7. Disconnect the wiring harness from motor.
8. Remove motor pulley from old motor and install on new motor.
NOTE: Be sure to take measurements of the pulley location on the old motor and in this way the belt will
be aligned.
9. Remove the old motor from the motor mount and install the new motor on the mount.
10. Reconnect the wiring harness to the motor.
11. Install motor mount assembly back into the dryer and replace bolts into proper holes finger tight.
12. Replace belts and adjust belt tension.
NOTE: Be sure that the belt alignment is still proper.
13. Retighten bolts
14. Reestablish power to dryer.
To Replace Blower Motor V-belts
1. Remove the ten (10) 1/4 - 20 x 1/4" socket button head screws from the perforated basket side and remove
the basket panel.
2. Remove the right side wrapper.
3. Remove the blower motor belt by loosening the 3/8" bolt with locking nuts.
4. Reinstall new belts by reversing steps 1 though 3.
To Replace Front Thruster Wheels
1. Discontinue power to the dryer.