Alliance Laundry Systems H242I Washer/Dryer User Manual


 
38 504509
Indicator Lights
IN USE Light:
This light will remain on while washer is in use.
DOOR LOCKED Light:
This light will come on after the start button has been
pushed and the washer door has locked. It will remain on
until the wash cycle has ended.
FINAL SPIN AND TUMBLE Light:
This light will come on at the start of the final spin and
remain on until the wash cycle has ended.
IMPORTANT: If washer fails to operate properly
after installation, make sure elecrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified serviceman
refer to the wiring diagram (located inside of control
cabinet), check for broken, loose or incorrect wiring.
The washer will stop (pause) shortly before first spin and
final spin.
To reduce the risk of bodily injury, do not
remove laundry from washer until all lights
are out, and all moving parts have stopped.
W092
WARNING