Filter
Top Products
504509 15
Step 9:
Wipe Out Inside of Washer Drum and
Dryer Drum
Before using the washer and dryer for the first time, use
an all-purpose cleaner, or a detergent and water solution,
and a damp cloth to remove shipping dust from inside the
drums.
Step 10:
Plug In the Washer and Dryer
Refer to Sections on Electrical Requirements and
connect the washer and dryer to an electrical power
source.
Step 11:
Check Installation
Refer to Installer Check on the back cover of this manual
and make sure that unit is installed correctly.
H244I
H154IE1A
Washer
Plug cord into separately fused 15 Amp circuit.
Electric Dryer
Connect to 30 Amp circuit.
Gas Dryer
Plug cord into separately fused 15 Amp circuit.
D254IE0A
D275IE1B
D254IE0A