Filter
Top Products
16 504509
Moving Unit to a New Location
To prevent damage while moving the washer, the
shipping materials MUST BE reinstalled.
Reinstallation of Shipping Materials
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers. See
illustration.
Insert hooked end of shipping brace into the open slot of
the motor mount. Attach with bolts and washers. See
illustration.
Reinstall front access panel.
Refer to the Installing the Unit for proper procedures
whenever the washer is moved.
. . .
H027IE1A
HOOKED
END OF
SHIPPING
BRACE
BOLTS
SHOCK SLEEVES
MOTOR
MOUNT