A SERVICE OF

logo

6 LOOKING AFTER THE MACHINE
5.
6.
Fit the pegs on the sides of the cartridge
into the slots in the sides of the develop-
ment unit.
%
w
Rotate the cartridge up until it snaps into ~
position
mII
7. Fit the handle onto the pin on the bottom
left of the cartridge.
Note: There are two possible types of
handle, as shown in the diagram.
8. Turn the handle clockwise to remove the
seal until you see the yellow band on the
seal.
Then, remove the handle.
9. Close the cover and replace the paper
cassette.
Turn until you see the ye~band.
~
.
.,
,.
‘, L
<l
., ,.
.1!
11’,
IL
L
“/
l-’p
._
‘, .
,.
,,
-, ,
‘?
,@
I
98