5 PROGRAMMING AND PRINTING REPORTS
1-6 Programming Groups
You can designate more than one destination for broadcasting using the memory, polling reception or
transfer request. If you regularly broadcast, poll or transfer to the same group of destinations (for
example, your branch offices), it may be convenient for you to be able to designate all these destina-
tions with only a few keystrokes. This can be done with preprogrammed groups.
You can program up to 9 groups. Each group may contain as many destinations as you want.
However, a group with more than 30 stations cannot be used for transfer request, a group with more
than 100stationscannot be used for polling reception, and a group with more than 142stationscannot
be used for memory transmission.
Only ten full telephone numbers can be stored in groups.
The following procedure applies both to programming new groups, or modifying existing ones.
1, PreSS Function 6 I
Yes .
GROUP NO H 1-9
2. Enter the group number that you
want to program or edit.
Example: Group 1, press 1
4. Type in the label, or edit the dis-
played one.
The method is the
same as for the RTI, TTI, and
Quick Dial key labels.
Example: DISTRIBUTORS
GROUP NO 1
YN
PROGRAM LABEL?
5. Press Yes to store the label.
3. Either:
.
If YOU do not want to program a
label, press No . Go to step 6.
● If you want to program or modify the label,
press Yes .
GROUP NO 1
OUl CK/SPEED/KPAD
