4 ADVANCED FEATURES
3.
1.
2.
OTHERS
3-1 Transfer Broadcasting
Transfer broadcasting allows your machine to be a broadcasting station in a transfer request oper-
ation (see page 54), if your ID code is the same as that of the requesting and receiving terminals.
This is an automatic procedure — any terminal that hasthe same lDcodeas you can use your machine
as a broadcaster. You do not have to be by your machine during the operation.
3-2 Speaker
The speaker can be used to Iistento the telephone Iineduring transmission, reception oron-hookdial-
ina. The sDeaker is cut off shortlv after the start of communication.
The speaker volume can be controlled with Function 55.
If thespeaker has been enabled, you will beableto hear the Iinecondition during communication. If the
line is busy, you can press Stop and begin another operation.
When the unit is in standby mode,
3.
pr13SS Function 5 5 Yes .
Repeat step 2 for the trans-
mission monitor.
ON HOOK MONITOR Y’ */#
MIN >>
MAX
Adjust the volume of the on-hook
4.
dial monitor while listening to the
speaker.
. Raise volume: press # .
. Lower volume: press * .
When correct, press Yes .
TRANS MONITOR
y/*/#
MIN
>>>
MAX
RECV MONITOR
y/*/#
MIN > MAX
Note: If all “>” signs disappear, the speaker volume is zero.
Repeat step 3 for the recep-
tion monitor.
Press Yes to return to
standby.
3-3 Short Preamble
Short preamble slightly reduces communication charges between Ricoh terminals.
Con-
tact your service representative if you are interested in this feature.
