3 ROUTINE OPERATION
Possible Problems
You want to take out the document
Press the scanner release button, open the scanner, and take out the document.
CAUTION: Do not pull outthedocument without opening thescanner, or you will damage the machine.
You want to send more than 50 pages
While the 50th page is being fed in during transmission place the following pages (up to 50) in the
feeder.
You made a mistake while dialing
●
●
If you already pressed ~Start , press Stop immediately.
If you haven’t pressed Start
I
yet, either;
a) Press No .
The entire number is deleted. Enter a new number.
b) Press Clear ~.
Only the last digit is deleted.
The Clear Original lamp has lit up
Take out the document (see the top of this page). Then redial the destination.
Hint: To redial, press ~Pause/Redial
then ~Start .
The Line Fail lamp has lit up
If the Communicating lamp is not lit, press
If the Communicating lamp is lit, wait until
The buzzer is ringing
The other party wants to talk to you.
stop ~.
goes out, then press Stop .
Pick up the handset, press Stop , and speak.
After speaking:
. If you have no more pages, hang up.
● If you have more pages, do the following.
1. Place them in the feeder.
2. Ask the other end to press Start . Do not hang up yet.
3. When you hear a high-pitched tone, press Start .
4. Hang up.
You want to send a message but there is a document in the feeder on Redial Standby or Send Later
Store the document that is in the feeder into the memory. See page 39.
32
