6 LOOKING AFTER THE MACHINE
8. Remove the wedge from the new clean-
ing unit.
9. Install the new cleaning unit. Make sure
that the lever moves back to secure the
front end of the cleaning unit.
Caution: Do not install the cleaning unit
the wrong way round.
The side with decals must face
down when the upper unit is
closed.
10. Slide in the master unit along the guides.
Caution: Do not touch the master belt
surface.
11. Push down on the bright green areas of
the master unit to make sure each side is
locked.
12. Close the upper unit.
1
t-lg
After changing the cleaning unit, do the maintenance procedures listed in the “User Maintenance
Procedure” section of this manual (excluding procedures in section 6-2 which you have done
already on the previous page).
104
