2 INSTALLATION
1.
2.
3.
4.
+ TTI +
Make sure that the unit is in 1.
standby mode.
Make sure that the unit is in
standby mode.
READY 100% 02 30PM
SET DOCUMENT
READY 100’% 02 30PM
SET DOCUMENT
PreSS Function 6 4 Yes .
2.
PreSS Function 6 5 Yes .
See Note.
The TTI can have up to 32 characters.
Type in the TTI in the same way
as for the RTI.
TTI Y
XYZ COMPANY NEW YORK
3.
To store this TTI, press
Yes .
Note
● lfyoujustentered, forexample, XYZ
COMPANY for the RTI, XYZ COM-
PANY will be displayed here. Then,
you can extend this for the TTI.
For example: XYZ COMPANY NEW
YORK
4.
See Note
The CSl can have upto20characters (num-
hers and spaces only). Using your fax ter-
minal’s telephone number is recom-
mended.
Example: 213 5559432
Type in the CSI using the ten-key
pad.
If you want to enter a space, press
Pause/Redial .
n our example, press 2 1 3
Pause/Redial 5 5 5 9 4
32.
To store the CSI and return to
standby, press
Yes .
Notes
. If a CSI has already been pro-
grammed, it is displayed now. Edi-
ting is explained on page 22.
. Press * before entering your tel.
number if you wish to enter a “+”
sign at the start of the CSI. The “+”
sign is an international symbol for
international dial access codes
(01 1 in the USA).
I
21
