4 ADVANCED FEATURES
– Programming the Forwarding Terminal Telephone Number –
The forwarding terminal can either be:
● A fax machine on the same PBX as this machine.
● A fax machine on an outside line, but not connected to a PBX at that location,
Program as follows:
1. PreSS , Function ~81 6
IYesl.
FOR WARD I NG# KPAD/ Y/N
2135553761,~~~~I~S,B
Note
If a number is already displayed,
either:
● To keep the number as it is,
● To erase the number, press
Clear .
2. Type in the telephone number at the
built-in ten-key pad.
Example: 2135553761
To correct a mistake:
. Press Clear to go back a space.
. Press No I to clear the whole number.
Note for PBX users
If your machine is behind a PBX, in-
clude the access code and a pause
before the number, if the forwarding
terminal is on an outside line.
Example: Access Code = 9
Press ~9 Pause/Redial I , then
enter the number.
3. Press ~Yes I to store the number.
70
