1.
2.
3.
4.
5.
Make sure the unit is in standby
mode.
Press T
cater wil
ansfer Request The indi -
Iight.
If PROGRAM OWN TEL # appears, do
Function 80 now. See page 24.
Place the document in the feeder.
Select the contrast and resolu-
tion.
READY 100C, 02 30PM
PAGES 00
KEYPAD N
Press hJo twice.
~
~
(SAF means Store And Forward)
Enter the number of the broad-
caster.
Use a Quick Dial key, Speed Dial
Code, or full number at the built-
in keypad.
Example: Quick 01
SAN FRANCISCO
QUICK# 01
YN
6. Press Yes (or press NO if you
made a mistake).
READY
100CO 02 30PM
# * QUICK SPEED KPAD
7. Enter an end receiver number.
Note: If the broadcaster is a FAX4000L,
FAX95 or FAX105 (FAX105 must
have optional memory installed), you
must use the dialing method given in
Note 2 on the next page.
Use a Quick Dial key, Speed Dial
Code, Group, or full number at the
built-in keypad. See Note 1.
I
1
Quick Dial, page 40.
Speed Dial, page 40.
Groups, page 41.
See Note 2 for an extra dialing method,
using Quick Dial, Speed Dial, and Groups
stored in the broadcaster.
8. Press
made
Yes (or press hlo if you
a mistake).
READY ‘OOO. 02 30PM
# * QIS’KPAD’ START
9. Either:
Enter another end receiver number.
Go to step 7. Do not enter more than 30
end receivers.
Or:
Press Start
55
