Filter
Top Products
4-28
REASSEMBLY NOTES:
1. When reassembliing the tub, install the
metal clips over the flanges of the two tub
sections with a hammer.
Tub Clamp
Tub Flanges
2. When reinstalling the tub assembly, hook
the two suspension springs into the front
holes of the tub and cabinet.
Front Slot
Front Slot
Front Holes
3. When reinstalling the bottom front coun-
terweight, first tape the flat nut in place in
the tub slot so it does not fall out.
Bottom Front Counterweight Flat Nut
4. When reinstalling the heating element in
the tub, make sure that it is held in place by
the wire holder (see the photo in step 27 on
the previous page).
Heating
Element