Filter
Top Products
4-27
23. Lift the rear half of the tub off the front half.
24. Lift the basket from the front half of the tub.
Front Half Of Tub
Rear Half Of Tub
Basket
25 To replace the heater element wire holder,
remove the T-20 torx screw.
26. To replace the tub gasket, pry the gasket
out of the slot and remove it. NOTE: The
basket hub is molded into the rear half of
the tub. If it is worn and needs to be
replaced, you will need to replace the rear
half of the tub.
Heating Element
Wire Holder
Tub Gasket
Basket Hub