Open as PDF
23 / EN
Washing Machine / User’s Manual
If the product does not have an emergency water drainage hose: To drain the water do the following:
a. In order to collect the water to flow out of the filter,
place a large vessel in front of the filter.
b. Turn and loosen the pump filter (counterclockwise)
until water starts to flow. Fill the flowing water into
the container you have placed in front of the filter.
Always keep a piece of cloth handy to absorb any
c When the water inside the machine is finished, take
out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers, if any, around the pump impeller region.
5. Replace the filter.
6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat
the tabs in the lower part into position first, and then press the upper part to close.