Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
56
F8138801
Machine Identification
The Machine ID Menu provides several different types
of manufacturing and machine information that can be
useful to the user, chemical supplier, and technician.
The Machine ID Menu cannot be navigated. Pressing
the keypad will return to Diagnostic Menu or
the Run Diagnostic Menu.
Machine Errors
The control displays and logs errors as they occur.
When the control senses the error condition, the audit
counter for that error increases by one. The control
saves the time and date of the last eight (8) errors
which have occurred. Following is a list of possible
errors:
Door Lock Error
If the control senses an unlocked loading door during a
cycle, the control will abort the machine cycle, display
the Cycle Aborted Error Menu and record and count
the Door Lock Errors audit counter. The control saves
the error type, cycle, segment and step in which it
happened and the date and the time on the Alarms (1
of 4) Menu. View “Lock” on the Alarms (2 of 4) Menu
for the total error count. The audio signal will also be
turned on for the error condition. The Cycle Aborted
Error Menu is displayed with the Alarm on until the
appropriate user input occurs. The machine cycle is
aborted and the user is only given the option of
clearing the Cycle Aborted Error Menu and returning
to the Cycle Menu.
Door Open Error
If the control senses an open loading door during a
cycle as described, the control will abort the machine
cycle, display the Cycle Aborted Error Menu and
record and count the Door Open Errors audit counter.
The control saves the error type, cycle, segment and
step in which it happened and the date and the time on
the Alarms (1 of 4) Menu. View “Door” on the Alarms
(2 of 4) Menu for the total error count. The audio
signal will also be turned on for the error condition.
The Cycle Aborted Error Menu is displayed with the
Alarm on until the appropriate user input occurs. The
machine cycle is aborted and the user is only given the
option of clearing the Cycle Aborted Error Menu and
returning to the Cycle Menu.
Drain Alarm Error
When the Drain Alarm time is exceeded, the control
will stop the cycle, display the Cycle Stopped Error
Menu and count and store the Total Drain Errors audit
counter. The control saves the error type, cycle,
segment and step in which it happened and the date
and the time on the Alarms (1 of 4) Menu. View
“Drain” on the Alarms (2 of 4) Menu for the total error
count. The audio signal will also be turned on for the
error condition. The Cycle Stopped Error Menu is
displayed alternating with the Run Menu (3 seconds
Error Menu/3 seconds Run Menu) with the Alarm on
until the appropriate user input occurs. The user can
continue or abort the machine cycle.
Drive Balance Switch Error
If the control detects the Variable Frequency Drive
(VFD) Balance Switch input as closed at the start of a
Drain step, the control will cause a Drive Balance
Switch error. The control will abort the machine cycle,
display the Cycle Aborted Error Menu and record and
count the Drive Balance Switch Errors audit counter.
The control saves the error type, cycle, segment and
step in which it happened and the date and the time on
the Alarms (1 of 4) Menu. View “Drive Balance
Switch” on the Alarms (2 of 4) Menu for the total error
count. The audio signal will also be turned on for the
error condition. The Cycle Aborted Error Menu is
displayed with the Alarm on until the appropriate user
input occurs. The machine cycle is aborted and the
user is only given the option of clearing the Cycle
Aborted Error Menu and returning to the Cycle Menu.
PHM1286R
Figure 71
Machine ID
Model: UWN060T3VXU1001
Serial #: 01234567890
Install Date: 04/12/2009
Machine Type: UW60
Control SN: 6440091
Front End SW: 3
Display SW: 3
Output SW: 2
Node Number: 250
Trim Value: 0