Alliance Laundry Systems PHM1401C Washer User Manual


 
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
31
F8138801
Program Menu
Program Menu
In System Menu, select Program and press .
To program cycles, select Modify Cycle and
press .
To change properties that will affect the machine
globally, select Global Setup (i.e., water temperature
Cold to 35°F, will make the cold water temp 35°F for
all cycles) and press .
Press the keypad to return to System Menu.
Modify Cycle
The Modify Cycle Menu is used to program the
cycles. For programming steps, the Modify Cycle
Menu changes to the Step Menu.
The Cycle Number will be highlighted when the
Modify Cycle is first displayed.
Press the or keypad to change cycle
selections.
The cycle can be turned on and off by pressing
the keypad. If the cycle is turned off, the Cycle
Name will display “Off” and the user will not be able
to make any changes to the cycle.
Press the keypad to make the highlighted box
move to the cycle name to the right of the cycle
number.
Press the keypad to make the display jump to
the End of Segment (EOS) Audio Signal Step Menu of
the last segment of that cycle which is programmed
“On”.
NOTE: All segments and available steps have to be
scrolled through even though they may be shut off.
Figure 27 illustrates the flow of the cursor during
the programming of a cycle.
To edit a cycle name, select the cycle name and press
the keypad.
The first character of the Cycle Name will have a
blinking underscore underneath to display it is ready
for editing. Use the and keypads to select
the different characters. After the desired character has
been selected, press the keypad to save the
character and move to the next character in the string.
The user may press the keypad to go back a
character. Pressing the keypad when located on
the first character will take the user to the last
character of the string, which may be a blank space.
Continue pressing the keypad to move to
desired character. The blinking underscore is under the
last character of the string and the keypad is
pressed, the blinking underscore will move to the first
character of the string.
Press the keypad to exit string edit mode.
PHM1022R
Figure 25
PHM1023R
Figure 26
Program Menu
Modify Cycle Global Setup
Modify Cycle
Cycle01: Towels White Bleach
Segment01: Prewash